Convert JuiceBox® Legacy to Next Gen

This section describes how to remove JuiceBox Legacy from the JuiceStand Pro and replace it with JuiceBox Next Gen.

1. Turn off the mains power to the hardwire connections.

Warning: Do not continue with this procedure until power has been disconnected.

2. Use a multimeter to ensure that there is no power at the hardwire connections.

Warning: Do not continue with this procedure until the multimeter shows that there is no power at the hardwire connections to mains.

3. Disconnect the charging station wires from the hardwire mains.
4. Release the fasteners (x4) that secure the charging station and backplate to the stand.
   Note: The charging station and backplate are removed as an assembly.
   
5. Release the fasteners that secure the backplate to the charging station. Remove the backplate.
   Note: A new backplate is installed in a later step.
   
6. Install the new charging station according to the "Installation - JuiceBox Next Gen" section of this manual, beginning at step 3.