Search

JuiceBox® Configuration

For best results, perform this procedure while standing within 5 ft (1.6m) of the JuiceBox.

Configure JuiceBox Using Bluetooth Connectivity

*Requires Firmware 1.0.46 or later

  1. Download and install the “JuiceConfigure” app onto your mobile device.

    blobid0.pngblobid1.png

    Video walkthrough of this section

  2. Open the JuiceConfigure app.

    NOTE: Make sure your phone and JuiceBox’s Bluetooth connection is enabled before starting to be able to configure Wi-Fi for your charger.

  3. Select START CONFIGURATION.

  4. Follow the onscreen instructions to proceed to JuiceBox configuration.

  5. Chargers are scanned and listed on the screen. Select Pair to configure the charger.

  6. Your JuiceBox is now connected to your account.

  7. Wi-Fi networks are scanned and listed on the screen. Select the network you want to connect your JuiceBox to.

  8. Enter the password of the selected Wi-Fi network and select Connect charger to Wi-Fi.

  9. The JuiceBox is connected to your account. Select CONTINUE.

  10. In the configuration screen, set the maximum current for charger at which you want to charge your vehicle, then select SAVE.

    NOTE: After connecting, JuiceBox checks its firmware version and performs any necessary updates. Wait 10 minutes before plugging in a vehicle.

Configure JuiceBox Using Wi-Fi Connectivity

  1. Download and install the “JuiceConfigure” app onto your mobile device.

    blobid0.pngblobid1.png

    Video walkthrough of this section

  2. Open the JuiceConfigure app.

  3. Select  START CONFIGURATION.

  4. Select Configure via Wifi.

  5. Have the Wi-Fi network password ready, then select NEXT.

    NOTE: If the JuiceBox is already power on before this step, disconnect it from power and re-connect again before proceeding.

    NOTE: After powering the JuiceBox, complete the steps 6 through 9 within 2 minutes.

  6. Navigate to the Wi-Fi settings on your mobile device. Connect to the "JuiceBox-###" or "JuiceNet-###" Wi-Fi network. If the network requires a password, use the password "GoElectric" (case-sensitive).

    NOTE: The actual name of the network varies by device, such as "JuiceBox-123".

  7. Return to the JuiceConfigure app.

  8. In the JuiceConfigure app, select the preferred local Wi-Fi network.

  9. Enter the Wi-Fi network password, if necessary, then select CONNECT CHARGER TO WI-FI.

  10. The app connects the JuiceBox to the Wi-Fi network, then select CONTINUE.

  11. You did it! The JuiceBox is now online and ready to charge.

    NOTE: After connecting, JuiceBox checks its firmware version and performs any necessary updates. Wait 10 minutes before plugging in a vehicle.