Search

JuiceBox® Configuration

For best results, perform this procedure while standing within 5 ft (1.6m) of the JuiceBox.

  1. Download and install the “JuiceConfigure” app onto your mobile device.

    blobid0.pngblobid1.png

    Video walkthrough of this section

  2. Open the JuiceConfigure app.

  3. Select START CONFIGURATION.

    mceclip0.png

  4. Select Configure via Wifi.

    mceclip3.png

  5. Have the Wi-Fi network password ready, then select NEXT.

    NOTE: If the JuiceBox is already power on before this step, disconnect it from power and re-connect again before proceeding.

    mceclip4.pngmceclip5.png

    NOTE: After powering the JuiceBox, complete the steps 6 through 9 within 2 minutes.

  6. Navigate to the Wi-Fi settings on your mobile device. Connect to the "JuiceBox-###" or "JuiceNet-###" Wi-Fi network. If the network requires a password, use the password "GoElectric" (case-sensitive).

    NOTE: The actual name of the network varies by device, such as "JuiceBox-123".

    mceclip6.png

  7. Return to the JuiceConfigure app.

    mceclip7.png

  8. In the JuiceConfigure app, select the preferred local Wi-Fi network.

    mceclip8.png

  9. Enter the Wi-Fi network password, if necessary, then select CONNECT CHARGER TO WI-FI.

    mceclip9.png

  10. The app connects the JuiceBox to the Wi-Fi network, then select CONTINUE.

    mceclip10.pngmceclip11.png

  11. You did it! The JuiceBox is now online and ready to charge.

    mceclip12.png

    NOTE: After connecting, JuiceBox checks its firmware version and performs any necessary updates. Wait 10 minutes before plugging in a vehicle.