Wi-Fi Setup

  1. Reset the circuit breaker that supplies power to the JuiceBox.
Note: The following steps must be completed within 2 minutes of reconnecting power to the JuiceBox.
  1. Open Wi-Fi settings on your personal device. Connect to the "JuiceBox-###" or "JuiceNet-###" Wi-Fi network. If the network requires a password, use the password "GoElectric" (case-sensitive).
    Note: The actual name of the network varies by device, such as "JuiceBox-123".
  2. In a web browser, navigate to or to setup.com to view a list of available Wi-Fi networks.
    Note: If there are problems connecting, ensure that the following addresses are not blocked:
    IP Address Protocol Ports FQDN
    Dynamic HTTPS 443 directory-api.emotorwerks.com
    Dynamic HTTPS 443 ota.zentri.com
    Dynamic HTTPS 443 dms.zentri.com UDP 8042 jbv1.emotorwerks.com UDP 8042 emwjuicebox.emotorwerks.com
    Dynamic HTTPS 443 device-backend.juice.net
    Dynamic UDP 8047 juicenet-udp-prod3-usa.enelx.com
    Dynamic HTTPS 443 juicenet-prod3-usa.enelx.com
    Dynamic UDP 8043 juicenet-udp-prod-usa.enelx.com
    Dynamic HTTPS 443 juicenet-prod-usa.enelx.com
    Dynamic UDP 8051 juicenet-udp-prod4-usa.enelx.com
    Dynamic HTTPS 443 juicenet-prod4-usa.enelx.com
    Dynamic UDP 8042 juicenet-udp-prod5-usa.enelx.com
    Dynamic HTTPS 443 juicenet-prod5-usa.enelx.com
  3. Select the desired Wi-Fi network. Enter the Wi-Fi network password, if necessary. Click Connect.
Verify that the JuiceBox is connected by checking that the "Network" indicator on the enclosure is solid blue.