-
Remove and discard the 8 fasteners to remove the old front panel from the pedestal.
-
Locate the serial number label on the bottom side of the new CCR.
-
Record the CCR and ICCID numbers from the label.
-
Hold the new CCR assembly near the pedestal.
-
Install the 8 Torx-10 flat head screws on both sides of the pedestal to secure the CCR assembly.
Note: It is recommended to apply a torque of 5.2 in-lbs to the screws.
Search
<% if (previousArticle) { %>
<% } %>
<% if (items.length > 1) { %>
<% if (previousTitle) { %>
<% } %>
<% if (nextArticle) { %>
<%= previousTitle %>
<% } %> <%= previousArticle.title %>
<% if (nextTitle) { %>
<% } %>
<%= nextTitle %>
<% } %> <%= nextArticle.title %>Main sections in this article
-
<% items.forEach(function(item) { %>
- <%= item.name %> <%= partial('partial-table-of-contents', { items: item.children, partial: partial }) %> <% }); %>
-
<% items.forEach(function(item) { %>
- <%= item.name %> <%= partial('partial-table-of-contents', { items: item.children, partial: partial }) %> <% }); %>